Pastel Playground Clown Bundle

***This bundle comes with one Jumperskirt in the size of your choosing, one Headdress and one set of wrist cuffs.***

Honk Honk! Time to make way for some cute clowns! Inspired by those parachute tents that we used to all play with in gym class when we were younger. You know, the ones that ballooned up and you sat inside on the edge. Well those always made me so happy so I thought I would make it into a dress but adding my little spin on it (aka adding clown elements). 

Jumperskirt Details:

The Jumperskirt is made with full ruching on the back to allow for all sorts of different body shapes and sizes. The dress also features three adjustable button holes on the straps and a removable waist tie. The dress features custom dyed green lace on the side of the straps along with yellow dyed lace attached to the dress liner at the bottom.  The front blue bow is pinned to the front of the bodice (therefore it is not removable, sorry). We attempted to make this bow removable only to find it always falling forward. On the left side of the bodice is a red invisible zipper that goes from the top of the bodice to a little bit below the waist line. The final production of this dress will also feature pockets!

The model is 5'6'' with a 120cm bust and is wearing size 2 of the dress. The Bodice does NOT come with the jumper skirt. But you can find this Blouse at Night Whisper Lolita.

 Jumperskirt Sizing:

The full production of this dress will be in four different sizes. 

There is a little bit of an overlap between each of the sizes to accommodate any body size fluctuations. If you're asking for any size recommendations I would suggest to stay within the range that you normally see yourself fluctuating between. Example: If you are around the 50" bust mark, but you normally fluctuate up to 52" then I would suggest you order size 3. But if you fluctuate down to 48" then I would suggest you size down to Size 2. If you have any sizing questions, please let me know and I will give my recommendation! I can happily exchange sizes when needed if you see my Exchanges/return policy here.

Jumperskirt Material: 

The outside material is a polyester material due to the type of printing method used (sublimation). The lining is a polyester blend similar to any "silky/smooth" dress liner.

However I want to preface that by saying the material itself "feels" like a thicker cotton material. I have brought this dress to a couple of different folk to try on and they all thought that it was cotton. I personally have a lot of sensory issues and this doesn't set off any of it. 

Wash instructions: Hand wash in cold water, Air dry only. Due to the poof balls especially, this dress is not meant to be in the washing machine. DO NOT PUT THIS IN THE DRYER.

Jumperskirt Changes made from the sample pictured to the full production:

The invisible zipper will be red so it is less visible. If you look clearly on this first sample, it has a white zipper shown. The printing order of the stripes on the back will be altered slightly so there are not two of the same color stripes next to each other at the seam. And the most exciting part, there will be pockets added!

Headdress Details:

The headdress features the same type of custom printed fabric from the outside part of the dress to create these colorful pleats and bows. On the edge of the biggest bow are two mini poof balls sewn together. The headdress is held on to the face by a small ribbon to tie under your chin. The final product will also include hairclips on the under side of the headdress to help it stay on the head. These will be placed two pleats up from the edge. 

Headdress Measurements: 

Length from edge pleat to pleat: 33.5 cm

Length from pom pom to pom pom: 49.5 cm

Width from edge of pleat to edge of pleat: 10 cm

Each ribbon is 49.5cm in lenth

Please note that this headdress's ruffles have been ironed up and away from the head to create a larger silhoutte.

Headdress Material:

The fabric is a polyester material due to the type of printing method used (sublimation). 

However I want to preface that by saying the material itself "feels" like a thicker cotton material. I have brought this dress to a couple of different folk to try on and they all thought that it was cotton. I personally have a lot of sensory issues and this doesn't set off any of it. 

Wash instructions: Hand wash in cold water, Air dry only. Due to the poof balls especially, this dress is not meant to be in the washing machine. DO NOT PUT THIS IN THE DRYER.

Changes from sample pictured to final production: The final product will also include hairclips on the under side of the headdress to help it stay on the head. These will be placed two pleats up from the edge. 

Wrist cuff Details:

Each order of wrist cuffs comes with a pair of 2 wrist cuff.s The yellow lace is custom dyed to match the bottom ruffle of the JSK. The bow features the same type of custom printed fabric from the outside part of the dress. The wrist cuffs have a thin elastic band which allows for the cuffs to strech for varying sizes of wrists. Please let me you if you would like to see other sizes of wrist cuffs!

Measurements: 

Relaxed circumferance: 15 cm

Max recommended circumferance: 23 cm (can stretch up to 33cm but then it has less ruffles). If you are interested in anything above the recommended stretch, please send me an email/message. If I have enough requests, I will happily make a second option.

Length from top of the wrist cuff to bottom edge of the second ruffle: 9cm

Material:

The fabric is dyed lace with the bow being polyester is a polyester material due to the type of printing method used (sublimation). 

However I want to preface that by saying the material itself "feels" like a thicker cotton material. I have brought this dress to a couple of different folk to try on and they all thought that it was cotton. I personally have a lot of sensory issues and this doesn't set off any of it. 

Wash instructions: Hand wash in cold water, Air dry only.